Flowmaster Purge Vents
Manual Push/pull & 12vDC Series

Steel Construct – Atmospheric of pressure flow

Used predominantly to ventilate heat in raked or cathedral ceilings, or where distance between roof and ceiling is minimal.

Also the odour and heat venting of individual rooms.

Available in manually operated and 12vdc electric actuator operation.

PP manual is a simple push / pull operation using an extended rod and claw, is suited to max ceiling height of 3.0m Used in conjunction with natural flow (atmospheric) ventilation and both types of air conditioning systems, with or without remote control function, in either dedicated or non dedicated mode.

Opening stroke length 100mm standard, Optional 150mm Both PP and 12vdc can be opened incrementally. The 12vdc units are operated by a  linear actuator (optional remote control) Max load current 3A. Operational noise level below 40dB with built in limit switch Speed 5 – 15mm/sec

Construction is steel or stainless steel, resin coated white. Sizes from 250 – 700 dia. are available for dedicated and non dedicated mode.

Condor architectural products are fabricated in steel, and resin coated to colour, Plastic units are not in the Condor product range

Unit is supplied in architectural format, ie specific to situation and required duty

Purge vent schematic
skillion roof ventilation
Condor Purge Vent
12vdc purge vent